The following details are extracted from the official configuration table for the SLG6700EVG1 model, a pure electric city bus designed for global markets. Please note that configurations are subject to change based on component supplier updates, and the final specification is subject to the actual factory state of the sample vehicle.
The following details are extracted from the official configuration table for the SLG6700EVG1 model, a pure electric city bus designed for global markets. Please note that configurations are subject to change based on component supplier updates, and the final specification is subject to the actual factory state of the sample vehicle.
1. Vehicle Overview
The SLG6700EVG1 is a left-hand drive, non-load-bearing body structure city bus powered by pure electric energy. It is built on a Shaolin chassis and is configured for urban passenger transport.
Sales Area: Global
Vehicle Type: City Bus
Driving Position: Left Hand Drive
Power Type: Pure Electric
Chassis Brand: Shaolin
2. Core Dimensions & Performance
Parameter
Specification
Overall Dimensions (LxWxH)
7700 × 2240 × 3084 mm
Wheelbase
3700 mm
Front/Rear Overhang
1190 mm / 2100 mm
Maximum Speed
90 km/h
Maximum Gradeability
≥15%
Passenger Capacity (Including Driver)
26+1
Curb Weight
5500 kg
Gross Vehicle Weight (GVW)
8000 kg
Minimum Ground Clearance
165 mm
3. Chassis & Drivetrain Configuration
Component
Specification
Drive Type
Rear-engine, Rear-wheel Drive (RR)
Wheel Material
Steel
Front Suspension
Leaf Spring with Anti-roll Bar
Rear Suspension
Leaf Spring with Anti-roll Bar
Steering Type
Hydraulic Power Steering
Braking System
Pneumatic (Air Brakes)
Front Brake
Disc
Rear Brake
Drum
Parking Brake
Energy Storage Spring Type
4. Powertrain & Battery System
Battery Brand: Freddie Power (BYD)
Battery Capacity: 109.4 kWh
Charging Type: Fast Charging
Charging Interface: European Standard Fast Charging Interface (Configured)
1 x 2kg Dry Powder + Battery Cabin Automatic System
Note: The contents of this configuration table may change with the technical improvements or product upgrades of the component suppliers. The specific configuration shall be subject to the actual factory state of the sample vehicle.